About Us

Our Method

Polyurethane Concrete Raising uses a foam material that is injected under the slab. When the components of this material are mixed, a reaction causes the material to expand. This expanded foam fills any voids beneath the slab and raises the concrete.

Our poly-foam compound is made from recycled materials. This material will never lose density, is permanent and weighs only about 2 lb. per cubic foot.

The process is as simple as 1, 2, 3!

  1. Tiny 5/8 inch holes are drilled at strategic places in the areas where the concrete is sunken and requires lifting.
  2. Once prepped, the poly-foam is pumped through the holes which fills the void and crevices beneath to then push the concrete back to its original level.
  3. When leveling is complete, the injection holes are patched discretely with new cement, allowing you to use your surface immediately.

Our Benefits

Cost Effective: Concrete raising is typically around half the cost of replacing the same concrete. Ultimately, the cost of raising or stabilizing concrete is a direct reflection of how much leveling material the project will require.

Time: Ready to use immediately!

Smaller holes: Polyurethane concrete raising drills a nearly invisible 5/8 inch hole (the size of a dime) and the process calls for considerably fewer holes that traditional mudjacking; Minimal patchwork needed.

Landscape: Your landscape is untouched throughout the entire process. No digging up. No cosmetic retouching.

Lightweight: As stated, this material weighs only about 2 lbs. per cubic foot; compared to traditional Mudjacking material that weighs on average 100 lbs. per cubic foot. Therefore, less weight is added to a potential sinking problem below the surface.

Next Step...

Call to set up your FREE inspection and bid at 208-970-5585 TODAY ...